Submersible pumps

Model: WQK Cutting Sewage Submersible Pump

Product Description

WQK three-phase cutting sewage sewage submersible pump (hereinafter referred to as the pump) by the motor, water pump, sealed three parts. The motor is located in the upper part of the pump, for the three-phase asynchronous motor, the pump and the motor between the alloy double-ended mechanical seal, fixed stop seal with "O" oil-resistant rubber seal for static seal.

The cutting pump impeller and pump bottom with bulb material, durable. Than ordinary impeller life extension of 2 times.

Conditions of Use

The pump can work continuously under the following conditions of use;

1. The pump delivery medium is the normal temperature slurry (less than 40 ℃);

2. The pH value of the medium is between 4 and 10, and the volume of the solid material in the conveying medium is less than 2%. The sewage pump is used to drain the thicker slurry. After use, it must be placed in the water for a few minutes. Clean and then store;

3. 4Kw above specifications should be installed over current and leakage protection;

4. Diving depth of not more than 5m.

Technical Parameters

Model	Flow (m³/h)	Head lift(m)	Power (kW)	Piping (mm)	Frequency (Hz)	Voltage (v)	Synchronous speed (r/min)
WQK10-10-0.75	10	10	0.75	50	50	380	3000
WQK15-9-1.1	15	9	1.1	50	50	220/380	3000
WQK25-7-1.5	25	7	1.5	50	50	220/380	3000
WQK25-10-2.2	25	10	2.2	50	50	380	3000
WQK42-10-3	42	10	3	76	50	380	3000
WQK50-10-4	50	10	4	76	50	380	3000
WQK65-15-5.5	65	15	5.5	100	50	380	3000
WQK85-15-7.5	85	15	7.5	100	50	380	3000
WQDK10-10-0.75	10	10	0.75	50	50	220	3000
WQDK15-9-1.1	15	9	1.1	50	50	220	3000